Indasa Cover Roll (600mm)

Indasa Cover Roll (600mm)

Indasa quality, can't beat that. The Indasa Cover Roll is a 25m roll of masking tape, with 600mm of polymask pre-attached to make masking up certain items insanely easy.

At Hydro Monkeys, the main use for this product is masking up alloy wheels AFTER paint but BEFORE dip.  Simply attach the taped side to the inside of the wheel, directly behind the spokes, then pull out the masking sheet, place it over the outside of the wheel (the part which would usually be covered by the tyre, and tape the second end down with regular masking tape.  The end result is a nice clean line behind the wheel spokes, and (less important but still looks good to your customer) no big stretched out pattern under the tyre.

It is also very useful for quick masking of panels to avoid overspray etc.  A real time saver and with Indasa masking tape involved you know there will be little or no reside left behind and very little chance of pulling the paint.

Available in 600mm , this is the length of polymask pre-attached to the tape and there's 25 metres on a roll. More than enough to do more than 4 sets of 17" wheels - even at "only" 25 metres, it goes a LONG way....

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 4154
  • Product Code: CR600
  • Availability: 2-3 Days
  • GB £3.80

Tags: indasa cover roll 600mm, cr600, indasa, adhesives tapes